Repels both water-based and oil-based spills and stains for maximum heavy duty stain protection.
Easy to use.
FDA compliant Solvent
Preserves natural look - not a surface coating.
Inhibits efflorescence.
Deep penetrating protection.
Interior and exterior use.
Weather resistant.
Impregnator Pro has a strong reputation as an excellent solvent based grout and stone sealer.
Because it is a solvent based sealer, Impregnator Pro uses smaller molecular structures to soak deep into even the most dense non-porous stones like granite.
Impregnator Pro is generally easier to apply and has a lower risk of hazing up on the surface of the tiles than water-based sealers.
Impregnator pro dries slower and with less hazing potential than water based sealers.
StoneTech® Impregnator Pro Heavy Duty Impregnating Sealer is formulated with advanced, solvent-based polymers to provide heavy duty protection to natural stone, tile, grout, marble, granite and other stones against tough oil & water-based stains.
Features and Benefits of Impregnator Pro:
FDA compliant solvent.
Because it is polymer based, it repels both water-based and oil-based spills and stains for maximum heavy duty stain protection.
Impregnator Pro has a strong reputation as an excellent solvent based grout and stone sealer.
Because it is a solvent based sealer, Impregnator Pro uses smaller molecular structures to soak deep into even the most dense non-porous stones like granite.
Impregnator Pro is generally easier to apply and has a lower risk of hazing up on the surface of the tiles than water-based sealers.
Impregnator pro dries slower and with less hazing potential than water based sealers.
Impregnator Pro provides heavy duty “natural look” protection for natural stone and grout such as:
How to Use and Apply Impregnator Pro Heavy Duty Penetrating Sealer on stone, marble, granite, tile and grout:
Keep out of reach of children. Use with good ventilation. No smoking.
Read label directions and cautions before using.
Always test in a small hidden or inconspicuous area with a 24-hour cure time to determine ease of application and desired results.
Allow new grout installations to cure a minimum of 72 hours prior to application.
Make sure surface is clean, dry and free of waxes and coatings.
Surface temperature should be between 50°F and 80°F.
Keep children and pets out of the area until surface use resumes or treated surface is dry.
Clean surface with StoneTech Klenz-All™ heavy-duty cleaner alkaline cleaner and degreaser for stone. Rinse thoroughly and allow stone to completely dry.
Mask off and protect any baseboards or adjacent areas to avoid splashing and overspray onto surfaces not intended to be treated.
Liberally apply an even coat of sealer with a paintbrush, paint roller or solvent-resistant, low-pressure sprayer. DO NOT USE A POWER SPRAYER.
Allow to penetrate the surface for 15-30 minutes; denser stone may require more time for sealer to penetrate.
During this time, distribute excess sealer over entire area to ensure even penetration.
DO NOT ALLOW EXCESS STONETECH Impregnator Pro TO DRY ON SURFACE.
Thoroughly wipe entire surface with dry cloth to remove excess Impregnator Pro Sealer from surface.
For large areas, use a bonnet.
A second coat is recommended for porous or absorbent surfaces and should be applied one hour after initial application as directed above.
Do not walk on surface for at least 4 hours.
Full cure is achieved after 24–72 hours.
Surface use may begin in 6-8 hours.
If excess sealer was not completely wiped off and a residue appears, wipe entire surface with a towel dampened with sealer. Use a white nylon scrubbing pad to loosen residue and follow with white absorbent towel to remove.
The solvent based technology allows you to quickly and easily wipe up any excess sealer on the tiles without any streaking or hazing issues.
Rags and equipment that are wet with product may be combustible. Clean up promptly after job is complete. Clean equipment with mineral spirits and allow to dry in a well-ventilated area. Allow rags to dry in a well-ventilated area out of the reach of children and pets. When dry, dispose of in accordance with local waste disposal regulations.
NOTE: Penetrating sealers such as Impregnator Pro provide protection against water or oil borne staining but cannot provide protection against etching.
We strongly recommend the training DVD’s for Stone Care and the hands-on Stone Class at the Bane-Clene training center.
Proper Care of Stone Protected with Impregnator Pro Heavy Duty Penetrating Sealer:
To maintain the stone’s natural beauty, clean surface as needed with StoneTech Professional Revitalizer™ or All purpose Stone & Tile Cleaner.
Highly alkaline, acidic, ammoniated, or abrasive cleaners are not necessary for daily maintenance and may also degrade the STONETECH® sealer used, adversely affecting stain resistance.
For tough or difficult to remove soil use Klenz-All™ Cleaner, a nylon scrubbing pad or a long handled stiff bristle brush.
Please note: Prior to using any cleaning material on a tile, stone, etc. installation, test a discrete area or scrap piece of tile to insure desired results.
Additional Stone, Ceramic and Porcelain Tile & Grout Information:
Click the “Usage & Tips” tab above for a related article titled
“Stone, Limestone, Travertine, Marble, Granite, Ceramic Tile & Grout Training Class”.
VIDEO: How to Seal Granite, Marble, Other Natural Stone with ImpregnatorPro
StoneTech Impregnator Pro Heavy Duty Stone, Tile & Grout Sealer provides heavy duty “natural look” protection for natural stone such as Granite, Marble, Limestone, Quartz, Travertine, Slate, Sandstone, etc. on Floors and Countertops
VIDEO: How to Protect Natural Stone like Granite and Marble with Stone Sealers from Bane-Clene
Bane-Clene has both the StoneTech products and hands-on training by experienced professionals to protect natural stone, including granite, marble and tile. Learn how to serve your present customers.
Usage & Tips
Stone, Limestone, Travertine, Marble, Granite, Ceramic Tile & Grout Training Class
Bane-Clene holds a comprehensive HANDS-ON (not just words and theory) training session on how to identify stone type, properly and safely clean all types of stone, seal, polish and restore marble, natural stone, ceramic tile and grout.
Upscale homes are increasingly built and remodeled with natural stone floors and countertops. Why not take advantage of the trend away from carpet and toward stone and wood floors? Why not MAKE MORE MONEY than ever before!
Just Some of the Topics Covered:
What is ceramic tile.
What is porcelain tile?
What is natural stone?
Different types of grout.
Chemistry of cleaning and sealing.
Cleaning & sealing procedures.
Pre-inspection.
Pricing of your services.
Maintenance programs.
Equipment & chemicals needed.
Honing and polishing of marble.
Determining type of stone.
Hands-on cleaning of tile.
Hands-on honing/polishing of marble.
For more information and to register, call 800 428 9512. This hands-on class is held only 2-3 times per year.
Additional Stone, Ceramic and Porcelain Tile & Grout Information:
