Truckmount Forums Glide Replacement

If you’re in the cleaning business, you know how crucial a smooth-running truckmount is. And that’s why we’re here to tell you about Truckmount Forums glide replacement.

After years of experience, we’ve found that a well-maintained glide can make all the difference. And that’s why regular inspections and replacements are vital.

In this article, we’ll guide you through the tools you’ll need, the steps you’ll have to go through, as well as some troubleshooting tips. So, let's get you up to speed on how to keep your machine in tip-top shape.

What this article covers:

What You’ll Need

Replacing a glide is simpler than you might think. You'll only need about 30 minutes and a basic understanding of carpet wand accessories. Here's what you should gather:

truckmount forums discussing glide replacements

How to Replace a Glide on Your Truckmount

Preparation

Before you begin, make sure you have all the necessary tools and materials at hand. This ensures a smooth and efficient installation process.

Proper preparation is key when replacing or performing maintenance on any part, whether it’s a glide or temperature and pressure relief valve replacement on truckmount.

truckmount wand glide replacement tips from forums

Heat The Glide

The glide material is often dense, making it challenging to install. Softening it up is crucial. You have two options:

  • Boil in Hot Water: Submerge the glide in boiling water for about 20 minutes. This is the safer option but may take longer.
  • Oven Heating: Place the glide in an oven set to 300 degrees Fahrenheit for 10 minutes. This is quicker but requires careful handling to avoid burns.

Safety First

Always use heat-resistant gloves or mittens when handling the heated glide. This protects your hands from burns and ensures a safer installation process.

Position The Wand

Secure the wand in a stable position, perhaps between two sturdy objects. This will free both your hands for the installation, making the process easier.

Align The Glide

The glide usually has cutaway marks that indicate its back side. Align these marks with the back of the wand. This ensures that the glide fits perfectly and functions as intended.

Install The Glide

  • Initial Positioning: Hold the glide at an angle close to the end of the wand.
  • Press and Snap: Use your left hand to press down on the glide while holding it in place with your right hand. Apply pressure until it pops onto the wand.
  • Slide it Down: Once it's on, slide it down towards the end of the wand until it snaps into place.

Check For Movement

After installation, give the glide a few tugs to ensure it's snug and secure. Any movement could compromise the cleaning process.

Jet Positioning

Check that the jets on the wand are positioned just behind the glide. Some wands may require spacers to achieve this alignment. These can usually be purchased from specialized stores or directly from the manufacturer.

Seal Air Gaps

If you notice any air gaps between the wand and the glide, you have a few options:

  • Leave it Be: Some professionals prefer a small air gap for better airflow.
  • Use Plumber's Putty: For a more secure fit, seal the gaps with plumber's putty, which is readily available at any home improvement store.

Final Check

Conduct a final inspection to ensure everything is secure and in place. Test the wand on a small area to confirm that it's functioning correctly.

Troubleshooting: Common Issues and Solutions

Even with a detailed guide, you might encounter some hiccups during the installation process. Here are some common issues and how to resolve them:

Glide Won't Fit

Problem: Despite heating, the glide doesn't seem to fit onto the wand.

Solution: Double-check that you have the correct glide size for your specific wand model. If the size is correct, try heating it for an additional 5-10 minutes.

Glide Slips Off

Problem: The glide keeps slipping off the wand during use.

Solution: This usually indicates that the glide isn't securely fitted. Remove it and reinstall, making sure to press down firmly until it snaps into place.

Inconsistent Jet Spray

Problem: The jets are not spraying consistently or are misaligned.

Solution: Check if your wand requires spacers for proper jet alignment. If so, install the spacers and test the spray again.

Wand Feels Heavy

Problem: The wand feels heavier or harder to maneuver after installing the glide.

Solution: This could be due to incorrect installation or a mismatched glide. Double-check the installation steps and ensure you have the correct glide for your wand model.

If you’ve run through our entire troubleshooting guide and are still running into problems, there’s always a chance the issue could be coming from elsewhere. A full system inspection will tell you if there’s other maintenance required, such as needing to replace truckmount water tank.

Conclusion

There you have it—a comprehensive guide to Truckmount Forums glide replacement. We hope this has been as informative for you as it was fun for us to put together. Remember, safety first, and if you follow the steps we’ve listed, you’ll have that glide replaced and functional in no time. 

And when it comes to top-of-the-line commercial carpet cleaning equipment and expert advice, Truckmount Forums is your go-to.

If you want to learn more, why not check out these articles below:


Featured collection

View all
Groutmaster Tile and Grout Cleaner Prespray
4.8
Rated 4.8 out of 5 stars
644 Reviews
$ 63.00
Sale
Black Label Sweet Breeze™ Prespray
4.9
Rated 4.9 out of 5 stars
304 Reviews
Regular price $ 55.00 Sale pricefrom $ 53.00 Save $ 2.00
Sale
USOR UNCHAINED (Urine Stain & Odor Remover) With EcoCide
4.9
Rated 4.9 out of 5 stars
536 Reviews
Regular price $ 39.59 Sale pricefrom $ 36.50 Save $ 3.09
Sale
Ultimate All Fiber Rinse
4.9
Rated 4.9 out of 5 stars
83 Reviews
Regular price $ 38.97 Sale price$ 34.00 Save $ 4.97