Carpets are essential to many homes and businesses, providing both comfort and style to interior spaces. But, these attractive floor coverings are susceptible to dirt, grime, and stains that can detract from their beauty and lead to unpleasant odors. A hot water extractor is a highly effective solution for maintaining carpets in pristine condition.
This powerful cleaning system uses hot water to loosen and remove dirt, grime, and stains from carpets. But, even if you use the best hot water extractor on the market, you won't get the best results if you don't use the right chemical.
So, what is the best chemical to use when you clean a carpet with a hot water extractor?
This article will cover the best chemical to use when cleaning a carpet with a hot water extractor. By the end, you should have a better idea of what will work best for different types of carpets. Read on!
What is the Best Chemical for Hot Water Extraction Carpet Cleaning?
Below are some of the best carpet chemical cleaning solutions we have tried and tested:
Black Label Sweet Breeze™ Prespray
Black Label Sweet Breeze™ Prespray is one of the best commercial floor cleaning solutions for carpets. It is known for its advanced cleaning properties, including high solubility, excellent rinsability, and deep penetrating action. This product is designed for use with hot water extraction systems and offers an outstanding boost to your carpet cleaning operations.
This solution's formulation helps dissolve tough soils quickly and emulsify them so they can be easily removed from the surface. It also features a pleasant scent that leaves the room smelling fresh and clean.
USOR Unchained (Urine Stain & Odor Remover) With Ecocide
Urine stains and odors from pets and other sources can be a challenge to remove. USOR Unchained is an enzymatic odor remover that effectively breaks down urine molecules, eliminating odors permanently. Ecocide is added to the product to help speed up the cleaning process as it works in contact with moisture. This product also helps prevent future staining and odors by blocking the molecules from reattaching to the carpet fibers.
This product is considered a high-traffic area carpet cleaning solution thanks to its long-acting protection and effectiveness. When used with a hot water extractor, it helps restore carpets to their former beauty, leaving them looking fresh and smelling clean. It's the best carpet cleaning solution for pet odor.
Ultimate All Fiber Rinse
We can't talk about the best commercial carpet extractor solution and fail to mention Ultimate All Fiber Rinse. This chemical is designed with hot water extractors to deep clean carpets and upholstery, leaving them soft and residue-free.
The special surfactants in Ultimate All Fiber Rinse break down dirt, grease, and oils which can be difficult to remove from carpets and other fabrics. The concentrated formula is also pH balanced to make sure it's safe for all carpets without leaving any sticky residue.
The chemical contains a powerful yet gentle blend of surfactants and conditioning agents that are safe for carpets and fabrics. It can help protect carpets from soiling and improve overall appearance when used as directed. It is also highly effective in removing pet odors and stains. With a citrus lush essential scent, Ultimate All Fiber Rinse will leave carpets smelling fresh and clean.
Frog Nasty Pre-Spray™ Formerly Known As Rat Nasty
Among our most popular products is Frog Nasty Pre-Spray™. This powerful pre-spray cleaner is specially formulated for use in hot water extractors and helps to enhance their performance. It powerfully penetrates carpet fibers to lift dirt, oil, and other soils from the carpet fibers before they are extracted.
This chemical contains a blend of detergents, surfactants, and emulsifiers that help break down carpets' soils. The combination of these ingredients helps to loosen the dirt and oils quickly so that they can be easily extracted by the hot water extractor.
In addition to its powerful cleaning action, Frog Nasty Pre-Spray™ also contains optical brighteners that help restore the carpet's original color. We found that it’s safe for use on all types of synthetic carpets, tiles, and concrete. It's undoubtedly the best solution for high-traffic tile floors.
Rug Smack Cleaner (Natural & Synthetic Fibers)
Rug Smack Cleaner is one of the best carpet cleaning chemicals to use when cleaning carpets with a hot water extractor. It is designed to quickly dissolve dirt and oils, leaving carpets clean and bright.
This product contains a blend of detergents and surfactants that break down soils without damaging the fibers. It is safe for use on natural and synthetic fibers alike. With Rug Smack Cleaner, you can achieve deep-down cleaning results while preserving the look of the fibers.
With a neutral pH range, this product is gentle enough for use on most carpets and rugs without damaging or discoloring the fibers. Additionally, it's buffered to maintain pH levels for longer-lasting effects and easier cleaning.
During our tests, we discovered that this product helps protect against re-soiling, which can occur if too much detergent interferes with the fibers' ability to resist dirt and stains. Its special formulation prevents greasy soils from adhering to the fibers, making them easier to clean in the future.
Blue Label Blue Dream Prespray
Another best seller in our catalog is Blue Label Blue Dream Prespray. This pre-application cleaner is designed to prepare the carpet fibers before hot water extraction. Its foaming action gently penetrates deep into the carpet and loosens dirt, oil, grease, and other soils that can be difficult to remove.
The unique blend of surfactants used in this pre-spray is designed to break down dirt and oils while also emulsifying them so they can be easily rinsed away. This product is highly recommended for use on carpets that are heavily oiled or have been neglected for a long period of time.
Blue Label Blue Dream Prespray has no Butyls, fillers, NTAs, or sticky residue. This makes it perfect for use in any hot water extraction machine. It's 99% green and environmentally safe; hence you don't need to worry about any negative impact on Mother Nature.
Choosing the best chemical to use when cleaning carpets with a hot water extractor is an important decision. It's not only about finding an effective cleaner but also one that is safe for both humans and the environment.
Try the above-mentioned products and see which works best for you. Ultimately, your goal should be to find a chemical that is cost-effective, safe, and still gets the job done most efficiently. Once you find the right chemical, you'll be able to save time and money while cleaning your carpets. Also, you'll have peace of mind knowing that you've done your part in environmental conservation. Good luck!
Did you find our blog helpful? Then consider checking other guides:
- Commercial Window Cleaning Solution
- Commercial Pressure Washing Chemicals
- Commercial Cleaning Solutions
- Commercial Rust Removal Solution
- Commercial Chemicals to Clean Grease
- Commercial Cleaning Solution to Remove Bad Odors
- Commercial Disinfectant Solutions
- Commercial Dry Cleaning Solutions
- Hospital Floor Cleaning Chemicals
- What Chemicals Clean Surfaces and Countertops in Restaurants?
- Chemicals for Cleaning Ceiling Tile in a Restaurant
- How to Clean Polished Porcelain Tile
- How to Clean Unglazed Porcelain Tile
- How to Clean Porcelain Tile That Looks Like Wood
- Best Product to Clean Porcelain Tile